Cable retention bracket
Removing the cable retention bracket
Prerequisites
1. Ensure that you read the
2. Follow the procedure listed in
3. Remove the cooling shroud.
4. Remove the PCIe card holder.
5. Remove all cables routed through the cable retention bracket.
CAUTION:
Many repairs may only be done by a certified service technician. You should only perform
troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or
telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by
your warranty. Read and follow the safety instructions that came with the product.
Steps
1. Pull the tab to release it from the notch and slide the cable retention bracket toward the front of the chassis to release it
from the chassis.
2. Lift the cable retention bracket out of the chassis.
Figure 17. Removing and installing the cable retention bracket
a. alignment pin (2)
b. tab
c. cable retention bracket
Next steps
1. Follow the procedure listed in
Installing the cable retention bracket
Prerequisites
1. Ensure that you read the
40
Installing and removing system components
Safety
instructions.
Before working inside your
After working inside your
Safety
instructions.
system.
system.