Dell Precision Rack 7910 Owner's Manual page 112

Menu Item Description
Internal USB Port Enables or disables the internal USB port. By default, the option is set to Enabled.
Integrated Enables or disables the integrated network card.
Network Card 1
I/OAT DMA Enables or disables the I/OAT option. Enable only if the hardware and software support the feature.
Engine
Embedded Video Enables or disables the Current state of Embedded Video Controller . By default the option Disabled.
Controller Current State of Embedded Video Controller is a read only field, indicating the current state for the
Embedded Video Controller. If the Embedded Video Controller is the only display capability in the system
(that is, no add-in graphics card is installed), then the Embedded Video Controller is automatically used as
the primary display even if the Embedded Video Controller setting is Disabled.
Current State of Displays the current state of the Embedded Video Controller. Current State of Embedded Video
Embedded Video Controller is a read only field, indicating the current state for the Embedded Video Controller
Controller
SR-IOV Global Enables or disables the BIOS configuration of Single Root I/O Virtualization (SR-IOV) devices. By default,
Enable the SR-IOV Global Enable option is set to Disabled.
OS Watchdog If your system stops responding, this watchdog timer aids in the recovery of your operating system. When
Timer this field is set to Enabled, the operating system is allowed to initialize the timer. When the option is set
to Disabled (the default), the timer will have no effect on the system.
Memory Mapped Enables or disables the support for PCIe devices that require large amounts of memory. By default, the
I/O above 4GB option is set to Enabled.
Slot Disablement Enables or disables the available PCIe slots on your system. The Slot Disablement feature controls
the configuration of PCIe cards installed in the specified slot. Slot disablement must be used only when
the installed peripheral card is preventing booting into the operating system or causing delays in system
startup. If the slot is disabled, both the Option ROM and UEFI driver are disabled.
This field controls the configuration of the card installed in the slot. You can set one of the following
options for each of the .....(Press F1 for more information)
1. Slot 1 Boot Driver
2. Slot 2 Boot Driver
3. Slot 3 Boot Driver
4. Slot 4 Boot Driver
112 System Setup
NOTE: Selecting Only Back Ports On and All Ports Off will disable the USB management port and
also restrict access to iDRAC features.
NOTE: 1. If the embedded video controller is DISABLED in BIOS and if you launch the Virtual
Console from the iDRAC, the Virtual Console Viewer is blank.
NOTE: 2. All monitors must be plugged into the GPU at power on, and must remain plugged into the
GPU until the system is booted into the operating system with the driver loaded. Once the system is
booted into the operating system the monitor can be unplugged, and then hot plugged. The monitor
will not be hot pluggable unless this process is followed.
● DP cable can be hot plugged
● mDP cable can be hot plugged
● DVI cable can be hot plugged
● DP to VGA dongle cable cannot be hot plugged
● Enabled (default)
● Disabled
● Enabled (default)
● Disabled
● Enabled (default)
● Disabled
● Enabled (default)
● Disabled