Dell Precision Rack 7910 Owner's Manual page 61

Figure 32. Removing and installing the Network Daughter Card (NDC)
1. captive screw socket (2)
3. captive screw (2)
5. network daughter card
Next steps
1. Replace the network daughter card.
2. Follow the procedure listed in
To see a video on how to remove & install the network daughter card, scan this QR code, or click here:
www.Dell.com/QRL/Workstation/R7910/NDC
After working inside your
2. connector on the system board
4. touch point (2)
6. back panel slot for Ethernet connectors
system.
Installing and removing system components
http://
61