Table of Contents
Advertisement
Steps
1. Align the notch on the memory module with the tab on the memory-module slot.
2. Slide the memory module firmly into the slot at an angle and press the memory module down until it clicks into place.
NOTE:
If you do not hear the click, remove the memory module and reinstall it.
Next steps
1. Install the
side
cover.
2. Follow the procedure in
SD card reader (optional)
Removing the SD card reader
Prerequisites
1. Follow the procedure in
2. Remove the
side
cover.
3. Remove the
fan
duct.
4. Remove the
memory
module.
About this task
The following images points to the location of the SD card reader and provide a visual representation of the removal procedure.
28
Removing and installing components
after working inside your
before working inside your
computer.
computer.
Advertisement
Table of Contents
