Cooling Fans; Removing A Cooling Fan - Dell Precision Rack 7910 Owner's Manual

Cooling fans

Your system supports six hot-swappable cooling fans.
NOTE: In the event of a problem with a particular fan, the fan number is referenced by the system management software,
allowing you to easily identify and replace the proper fan by noting the fan numbers on the cooling-fan assembly.

Removing a cooling fan

Prerequisites
1. Ensure that you read the
2. Follow the procedure listed in
CAUTION: Many repairs may only be done by a certified service technician. You should only perform
troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online
or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered
by your warranty. Read and follow the safety instructions that came with the product.
CAUTION: The cooling fans are hot-swappable. To maintain proper cooling while the system is on, replace
only one fan at a time.
NOTE: The procedure for removing each fan is identical.
3. Press the fan release tab and lift the cooling fan out of the cooling-fan assembly.
Figure 12. Removing and installing a cooling fan
1. cooling-fan assembly
3. fan release tab (6)
5. cooling-fan connector on system board (6)
To see a video on how to remove & install a fan or the fan assembly, scan this QR code, or click here:
www.Dell.com/QRL/Workstation/R7910/Fans
Safety instructions.
Before working inside your system.
2. cooling-fan connector (6)
4. cooling fan (6)
Installing and removing system components
http://
33