Installing A Cooling Fan; Removing The Cooling-Fan Assembly - Dell Precision Rack 7910 Owner's Manual

4. Replace the cooling fan.
5. Follow the procedure listed in

Installing a cooling fan

Prerequisites
1. Ensure that you read the
2. Follow the procedure listed in
CAUTION: Many repairs may only be done by a certified service technician. You should only perform
troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or
telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by
your warranty. Read and follow the safety instructions that came with the product.
Steps
1. Align the plug at the base of the cooling fan with the connector on the system board.
2. Slide the cooling fan into the securing slots until the tabs lock into place.
Next steps
Follow the procedure listed in
To see a video on how to remove & install a fan or the fan assembly, scan this QR code, or click here:
www.Dell.com/QRL/Workstation/R7910/Fans

Removing the cooling-fan assembly

Prerequisites
1. Ensure that you read the
2. Follow the procedure listed in
CAUTION: Many repairs may only be done by a certified service technician. You should only perform
troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or
telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by
your warranty. Read and follow the safety instructions that came with the product.
Steps
1. Unlock the cooling-fan assembly from the chassis by lifting the release levers upward.
34 Installing and removing system components
After working inside your
Safety instructions.
Before working inside your
After working inside your
Safety Instructions
Before working inside your
system.
system.
system.
system.
http://