Dell Precision Rack 7910 Owner's Manual page 35

2. Lift the cooling-fan assembly out of the chassis.
Figure 13. Removing and installing the cooling-fan assembly
1. cooling-fan assembly
3. release lever (2)
5. cooling-fan connector (6)
To see a video on removing and installing a cooling-fan assembly, click http://www.Dell.com/QRL/Server/PER730/
Fans or scan the following QR code.
Next steps
1. Replace the cooling-fan assembly.
2. Follow the procedure listed in
To see a video on how to remove & install a fan or the fan assembly, scan this QR code, or click here:
www.Dell.com/QRL/Workstation/R7910/Fans
After working inside your
2. cooling fan (6)
4. guide pin on the system board (2)
6. guide pin on the chassis (6)
system.
Installing and removing system components
http://
35