Quantum PX720 Unpacking And Installation Instructions page 8

Quantum PX720 Unpacking and Installation Instructions
Document 6444602-04 A01
March 2005
0
Unboxing the Library
Figure 5 Minimum Floor
Space Requirements—
Uncrating Site
8
To unbox the library:
1 Check the packing list and verify that all components have been received.
If any part is missing or damaged (look for scuffs on the
Note:
antistatic bag), contact your authorized reseller.
2 Choose the unloading side. The PX720 may be unloaded from only the
right side of the pallet.
3 Verify the minimum floor space requirements (see
Uncrating the library requires a minimum of 3 feet (91 cm) on
Note:
all sides. For the side being used for the ramp, uncrating the
library requires an additional 7 feet (2.13 m) for a total of 10
feet (3.05 m) on that side.
space required by the PX720 at its uncrating site. The
minimum height required for unpacking the PX720 is 85
inches (2.16 meters). The crate occupies a footprint of 48 x 56
in. (122 x 142 cm).
3 ft.
(91 cm)
4 Cut the two steel bands that secure the library and packing material to the
pallet (see figure 6).
The steel bands are under tension and will snap away when
Warning:
cut. Wear safety goggles when cutting the steel bands.
Unpacking the Library
figure
Figure 5 shows the minimum floor
3 ft. (91 cm)
Ramp side
7 ft. (2.13 m)
Cabinet
front
3 ft. (91 cm)
5).