Quantum PX720 Unpacking And Installation Instructions page 11

Figure 10 Lowering the
Ramp
Positioning the Library
8 Remove the front rail from the pallet.
9 Remove the accessory kit from the pallet and place it at a location to be
accessed later.
10 Cut the tape securing the ramp against the library.
11 Use two of the hex 3-3/8 in. hex head bolts, lock washers, and flat
washers removed in
Hex head bolts
To position the library:
0
1 Map out a route to the installation site (see the Quantum PX720 Pre-
Installation Site Survey Instructions).
2 Remove the four restraining bolts securing the PX720 to the shipping
pallet (see figure
Unpacking the Library
Quantum PX720 Unpacking and Installation Instructions
step 7 to secure the ramp to the pallet (see
11) using a 3/4 in open-end wrench.
Document 6444602-04 A01
March 2005
figure
Ramp
10).
11