•
To change the password, use the up and down arrows to select
Change Password and press
6-digit password using the numbers provided on the OCP. Press
to accept the new password. When prompted, re-enter the
Select
password to confirm.
•
To enable autoclean, use the up and down arrows to select Autoclean
and press
Select
•
To enable the left load port, use the up and down arrows to select Left
Load Port (16) and press
•
To enable the right load port, use the up and down arrows to select
Right Load Port (32) and press
7 When you are finished viewing/editing the setup information, press
twice to return to the
Back
8 From the
screen, press
Home
9 Before the network information can become active, the cabinet must
reboot. To reboot the cabinet, use the up and down arrows to highlight
the cabinet and press
10 Use the up and down arrows to select the reboot option and press
The library reboots.
Installing the Quantum PX720 Library
Quantum PX720 Unpacking and Installation Instructions
. To change the password, enter a
Select
.
.
Select
.
Select
screen.
Home
to enter the operations screen.
Ops
.
Select
Document 6444602-04 A01
March 2005
Select
37
.