10. PCB board 10
Procedure
1) Unfix the hooks and then open the
electronic control box cover (4 hooks)
(see CJ_ODU_PCB_010-1 ).
2) Remove 4 screws on the electronic
control board and then turn over
the electronic control board (see
CJ_ODU_PCB_010-2 ).
Note: This section is for reference only. Actual unit appearance may vary.
Illustration
Outdoor Unit Disassembly 61
Outdoor Unit Disassembly 31
CJ_ODU_PCB_010-1
CJ_ODU_PCB_010-2