Procedure
3) Remove the 1 screw on the evaporator
located at the left fixed plate (see CJ_
EP_025).
4) Remove the 1 screw on the evaporator
located on the right side. (see CJ_EP_025).
5) Bend the piping carefully, separate
the chassis assembly(above) and the
evaporator then take the evaporator out.
(see CJ_EP_026)
Note: This section is for reference only. Actual unit appearance may vary.
Illustration
Indoor Unit Disassembly 16
Outdoor Unit Disassembly 16
CJ_EP_025
CJ_EP_026