COMFORT-AIRE Century VMH-SV Series Service Manual page 79

2. PCB board 2
Procedure
1) Remove the fixing screws of the
compressor capacitor, then pull it out
(see CJ_ODU_PCB_002-1)
2) Remove 2 screws of the transformer
and then remove it. (see CJ_ODU_
PCB_002-1)
3) Remove the fixing screws of the fan
motor capacitor, then remove it. (see
CJ_ODU_PCB_002-1)
4) Remove the 4 screws of the electronic
installing box and then remove it.
(see CJ_ODU_PCB_002-1) (for some
models)
5) Remove the 2 screws of the AC
contactor and then remove it. (see
CJ_ODU_PCB_002-2)
Note: This section is for reference only. Actual unit appearance may vary.
Illustration
Capacitor of fan motor
 Outdoor Unit Disassembly 51
Outdoor Unit Disassembly 21
Capacitor of compressor
CJ_ODU_PCB_002-1
CJ_ODU_PCB_002-2
