Procedure
3) Pull out the connectors (see CJ_
ODU_PCB_010-3 ).
4) Remove the 9 screws and unfix
the 3 hooks and then remove the
electronic control board(see CJ_
ODU_PCB_010-3 ).
5) Remove two screws and then
remove the electronic control box
subassembly on partition board
assembly. (see CJ_ODU_PCB_010-
4 ).
Note: This section is for reference only. Actual unit appearance may vary.
Illustration
Outdoor Unit Disassembly 62
Outdoor Unit Disassembly 32
CJ_ODU_PCB_010-3
CJ_ODU_PCB_010-4