Terminating The Scsi Tabletop Tape Drive; Figure 21 Server Scsi Cable Connections; Dlt-V4 Product Manual - Quantum DLT V4 User Manual

Quantum dlt v4: user guide

Hide thumbs Also See for DLT V4:

Table of Contents

Figure 21 Server SCSI Cable

Connections

Terminating the SCSI Tabletop Tape Drive

You must terminate the tape drive if it is the last physical device on the

SCSI bus (at the end of the SCSI chain). If another SCSI device is the last

device on the SCSI bus, confirm that it is properly terminated and do not

terminate the tape drive.

Regardless of which device terminates the SCSI bus, it must

Note:

have power applied and be powered on for proper

termination to occur.

To terminate the tape drive, locate the terminator in the accessories

package and press it firmly into either of the two SCSI connectors on the

rear panel of the tape drive. Secure the terminator by tightening the

screws until snug. See

Chapter 5 Installing the Tabletop SCSI Tape Drive

Terminating the SCSI Tabletop Tape Drive

figure 22

for more details.

SCSI host

adapter

SCSI

cable

Table of Contents