Quantum DLT V4 Quick Start Manual

DLT-V4 Tape Drive
Quick Start Guide
English- - - - - - - - - - - 1
German - - - - - - - - - - 5
Spanish - - - - - - - - - - 9
French - - - - - - - - - - 13
Japanese - - - - - - - - 17
Korean - - - - - - - - - - 21
Simplified Chinese - 25
Introduction
This guide provides instructions on how to configure and install the DLT-V4 tape
drive in the following configurations:
• Internal Tape Drive — SCSI, SATA, and USB versions
• Tabletop Tape Drive — SCSI and USB/eSATA versions
N : See the last page of this document for additional resources.
OTE
Internal Tape Drive
1 Inspect the shipping box and contents of the box for damage. If you find any
damage, report it to the shipping company.
N : Save the packing materials in case you need to move or ship the
OTE
tape drive. You must ship the tape drive in the original or equivalent
packing materials to preserve your warranty.
2 Select a server or workstation to host the tape drive.
3 Download the device driver from the following Web site:
http://www.quantum.com/ServiceandSupport/
SoftwareandDocumentationDownloads/DLTV4/Index.aspx.
4 Shut down and power off the host and all peripheral devices attached to the
selected host.
5 SCSI Tape Drives Only — If necessary, change the SCSI ID using the SCSI
jumpers (see figure 1). (For complete instructions, see the DLT-V4 Product
Manual.)
N : The factory default SCSI ID is 5.
OTE
0
0