Installing The Internal Sata Tape Drive; Figure 8 Removing The Workstation Cover (Example) - Quantum DLT V4 User Manual

Installing the Internal SATA Tape Drive

Figure 8 Removing the
Workstation Cover (example)
DLT-V4 Product Manual
To install the tape drive, follow these steps:
Shut down the operating system and power off the server or
1
workstation.
Power off all peripheral devices, such as printers and other connected
2
devices.
Do not go to step 3 until you have completed steps 1
Caution:
and 2. Failure to follow these instructions may result
in damage to the tape drive or other devices.
Remove the cover from the server or workstation as described in the
3
server or workstation's documentation (see
Chapter 3 Installing the Internal SATA Tape Drive
Installing the Internal SATA Tape Drive
figure
3
8).
18