Other Requirements; Scsi Host Adapter; Application Software - ADIC AIT 100D Installation And Operating Manual

Other Requirements

SCSI Host Adapter

If your host system does not have an integrated SCSI controller, a SCSI host adapter must be used to connect
the host computer with the AIT-70
requirements and your needs. If you are not sure about your host adapter requirements, please call ADIC's
Technical Assistance Center (ATAC) and ask for assistance.
SE and HVD SCSI devices, are not compatible. Do not attempt to
connect both types of devices to the same SCSI bus.

Application Software

The software you use will depend upon your storage needs and the system you are using.
6
Introduction
/100 . The host adapter you choose will depend on your system
D D
The AIT-70 is a Fast Wide SCSI device and is available in SE
D
and HVD configurations. Be sure that your host adapter is
Fast Wide SCSI capable.
The AIT-100 is a Wide Ultra SCSI device and is available in
D
HVD or SE/LVD configurations. Be sure that your host
adapter is Wide Ultra SCSI capable.
SE and HVD SCSI devices, are
attempt to connect both types of devices to the same SCSI
bus.
Notes
are not not compatible. Do Do not
Caution
not