Subaru Crosstrek EyeSight 2024 Manual page 84

Advanced Adaptive Cruise Control
• If you depress the brake pedal softly, the stay-stopped function may not start.
In this case,
• When the operating conditions
of the Auto Start Stop system
are satisfied and the vehicle is
stopped, the engine is automat-
ically stopped by the Auto Start
Stop system without depress-
ing the brake pedal. The indica-
tor light continues to illuminate
during the temporary stop by
the Auto Start Stop system.
 Refer to the vehicle Owner's
Manual for details.
Resuming Adaptive Cruise Control in stay-stopped status
Setting using the RES/SET switch
Even when the vehicle in front remains stopped, Adaptive Cruise Control can be activated
by operating the RES/+ switch or SET/- switch.
indicator) turn off, and
green.
• Press the SET/- switch. The speed is automatically set to 20 mph (30 km/h).
• Press the RES/+ switch. The vehicle speed that was set before the stay-stopped function
activated is set again.

Page 90
• When Adaptive Cruise Control is resumed from stay-stopped status and the
vehicle in front accelerates, your vehicle will also accelerate and continue to
follow the vehicle in front at the previously set following distance. However, if
the lead vehicle does not start moving or pauses, stay-stopped status will be
automatically restored after approximately 3 seconds.
• While the engine is automatically stopped by the stay-stopped function* and
Adaptive Cruise Control is activated, the engine automatically restarts and the
Auto Start Stop indicator turns off when the vehicle in front starts moving.
*: The Auto Start Stop system activates following activation of the stay-
stopped function.
84
NOTE
(READY indicator) will not illuminate.
(Adaptive Cruise Control indicator) changes from white to
NOTE
(HOLD indicator) and
S03481
(READY