Subaru Crosstrek EyeSight 2024 Manual page 139

• When the main cruise control is off and the
Adaptive Cruise Control is activated.
• When the main cruise control is on, switching between Adaptive Cruise Con-
trol and Conventional Cruise Control is possible by pressing the
(Following distance setting) switch*.
*: To switch to Conventional Cruise Control, press and hold the switch for
approximately 2 seconds or longer.
• Conventional Cruise Control can be used even when EyeSight is temporarily
stopped.
How to use Conventional Cruise Control
■ Setting Conventional Cruise Control
(1) Setting Adaptive Cruise Control to standby status
Press the
(white), your vehicle indicator and the following distance setting indicator are displayed
on the EyeSight display area of the combination meter display. The set vehicle speed
display will read "- - MPH (- - - km/h)".
When the
Adaptive Cruise Control.
NOTE
(CRUISE) switch. At this time,
(CRUISE) switch is pressed, the initial cruise control mode is always
H00541
Conventional Cruise Control
(CRUISE) switch is pressed,
(Adaptive Cruise Control indicator)
Following
distance
setting
indicator
Adaptive
Cruise
Control
indicator
(white)
/
H00694
139