■ Canceling Lane Departure Prevention Function
●
Canceling by driver operation
Any of the following operations temporarily cancels Lane Departure Prevention Function.
While temporarily canceling this function, the lane indicator turns to gray.
• Depressing the brake pedal strongly
• Operating the turn signal lever
• The system determines that the driver operates the steering wheel to make a lane
change.
• Turning on the hazard warning flasher switch
●
Automatic cancellation by the system
Under the following conditions, Lane Departure Prevention Function is temporarily can-
celed.
While the function is temporarily canceled, the lane indicator turns to gray.
• The system does not detect the lane markings.
• The vehicle speed is less than approximately 37 mph (60 km/h) or is more than approxi-
mately 100 mph (160 km/h).
• Vehicle Dynamics Control or Traction Control Function is activated.
• Either the driver's door, the front passenger's door or the rear door is open.
• The driver's seatbelt is unfastened.
• The electronic parking brake is applied.
• The select lever is moved to a position other than "D", "M" (models with manual mode) or
"L" (models with "L" position).
- Lane Departure Prevention Function can be resumed after the select lever is returned
to the "D", "M" or "L" position.
• Entering a sharp curve
• On a sharp curve
• Due to the road conditions
• Due to another system operating
• The EyeSight system has a malfunction.
Page 152
• The EyeSight system has stopped temporarily.
White)
Page 154
Lane Departure Prevention Function
(EyeSight warning indicator: Yellow)
(EyeSight temporary stop indicator:
117