Subaru Crosstrek EyeSight 2024 Manual page 115

How to use Lane Departure Prevention Function
Operate the center information display to turn on Lane Departure Prevention Function.
This function is turned on by selecting "All Functions" or "Lane Departure Prevention Func-
tion Only" on the "Lane Departure" screen of the EyeSight settings.

Page 157
When Lane Departure Prevention Function is
turned on, the lane indicator (gray) and your
vehicle indicator
EyeSight display area of the combination
meter display.
Lane Departure Prevention Function goes
into the standby status, and the lane indicator
(white) illuminates when all of the following
conditions are met.
• The vehicle speed is between approxi-
mately 37 mph (60 km/h) and 90 mph (145
km/h).
• The system is detecting the lane markings.
• Lane Centering Function is not operating.
• The driver is operating the steering wheel.
• On a road that has a lane width that is
between approximately 10 ft (3 m) and 15 ft (4.5 m)
• On a straight road or gentle curve
• Driving near the center of a lane
are displayed on
Lane Departure Prevention Function
the
Lane
indicator
(gray)
White
H00691
H00692
115