Subaru Crosstrek EyeSight 2024 Manual page 74

Advanced Adaptive Cruise Control
■ How to use Adaptive Cruise Control
●
Setting Adaptive Cruise Control
(1) Setting Adaptive Cruise Control to standby status
Press the
(white), your vehicle indicator and the following distance setting indicator are displayed
on the EyeSight display area of the combination meter display.
The set vehicle speed display will read "- - MPH (- - - km/h)".
To set the ready status:
Adaptive Cruise Control can be activated
when all of the following conditions are
met and
played on the EyeSight display area.
- All doors (except the rear gate) are
closed.
- The driver's seatbelt is fastened.
- The electronic parking brake is not
engaged. The electronic parking brake
indicator light is turned off.
- The select lever is in the "D" or "M" (models with manual mode) position.
- The brake pedal is not depressed while driving or the brake pedal is strongly
depressed while stopping.
- EyeSight operation is not temporarily stopped.
cator: White) is turned off.
 Page 154
74
(CRUISE) switch. At this time,
H00530
(READY indicator) is dis-
(Adaptive Cruise Control indicator)
Following
distance
setting
indicator
Adaptive
Cruise
Control
indicator
(white)
READY
indicator
(EyeSight temporary stop indi-
H00681
H00682