Subaru Crosstrek EyeSight 2024 Manual page 35

Activation of Pre-Collision Braking System when turning
• The Pre-Collision Braking Sys-
tem recognizes oncoming vehi-
cles, pedestrians,
cyclists or motorcycles as iden-
tified objects when you are
making a turn. The system is
intended to avoid or reduce the
severity of collisions
oncoming vehicles that are
approaching in the neighboring
oncoming lane, but the vehicle
may not be able to stop or the
system may not activate under certain conditions*.
• If your vehicle is moving faster than approximately 16 mph (25 km/h) when
you turn, the system will not activate. Also, even if your vehicle is moving
approximately 16 mph (25 km/h) or slower, if the obstacle suddenly cuts in
front of you or is outside the camera's field of view, your vehicle may not stop
or the system may not activate depending on various conditions* such as vis-
ibility or the slipperiness of the road.
*: Conditions
- Speed difference with the identified object, distance to the identified object,
the angle of approach, changes in the actions of the identifiable object and
the position of the identifiable object relative to the side of your vehicle.
- Vehicle conditions (amount of load, number of occupants, etc.)
- Road conditions (grade, slipperiness, shape, bumps, etc.)
- Visibility ahead is poor (rain, snow, fog or smoke, etc.).
- The obstacle is something other than an identifiable object.
• A parked vehicle or a vehicle that is traveling in the same direction as
your vehicle
• An animal, etc.
• A guardrail, telephone pole, tree, fence or wall, etc.
- Even if an identified object has been detected, you are not signaling to
move in the direction that your vehicle is actually traveling.
- Even if the object is an identifiable object, it is traveling close to objects on
the side of the road.
- Even if the object is an identifiable object, it is stopped or traveling in your
lane.
oncoming
with
Pre-Collision Braking System
H00969
Continued on next page 
35