Subaru Crosstrek EyeSight 2024 Manual page 140

Conventional Cruise Control
(2) Switch to Conventional Cruise Control.
Press and hold the
seconds or longer to switch from Adaptive Cruise Control to Conventional Cruise
Control. A notification sounds 1 short beep.
At this time, the following distance setting indicator on the EyeSight display area of the
combination meter display turns off and
(white) is displayed.
To set the ready status:
Conventional Cruise Control can be acti-
vated when all of the following conditions
are met and
displayed on the EyeSight display area.
- All doors (except the rear gate) are
closed.
- The driver's seatbelt is fastened.
- The electronic parking brake is not
engaged. The electronic parking brake
indicator light is turned off.
- The select lever is in the "D" or "M"
(models with manual mode) position.
- The brake pedal is not depressed.
- The road is not on a steep slope.
- The steering wheel has not been turned significantly in either direction.
- The X-MODE is not turned on (the X-MODE indicator goes off).
140
/ (Following distance setting) switch for approximately 2
H00542
(READY indicator) is
(Conventional Cruise Control indicator)
Conven-
tional
Cruise
Control
indicator
(white)
READY
indicator
H00695
H00696