Subaru Crosstrek EyeSight 2024 Manual page 15

• Replace damaged wiper blades or worn wiper blade rubbers as soon as pos-
sible. Using damaged wiper blades or worn wiper blade rubbers may cause
streaking on the windshield. The camera may not be able to detect objects
accurately and the EyeSight system may not function properly due to streaks
or droplets remaining on the windshield.
• Do not install any accessories
on the front side such as on the
hood or the grille. It may affect
the camera view and the sys-
tem may not operate correctly.
• Make sure that the cargo
loaded on the roof does not
interfere in the camera's field
of view. Obstructing the cam-
era's view may impair the sys-
tem operation. For details,
contact a SUBARU dealer.
• Keep the windshield (outside
and inside) clean at all times. When the windshield has become fogged, or it
has a dirt or an oil film on it, the camera may not detect objects accurately and
the EyeSight system may not operate correctly. Never mount any device or
accessories to the center air vent, as any airflow change may impact
EyeSight performance.
• Do not use any glass coating agents or similar substances on the windshield.
Doing so may interfere with the proper operation of the system.
• Do not install any film or an additional layer of glass on the windshield. The
system may not operate correctly.
• If there are scratches or cracks on the windshield, contact a SUBARU dealer.
• To have the windshield replaced or repaired, contact a SUBARU dealer. Do
not install a windshield other than a genuine SUBARU windshield. The cam-
era may not be able to detect objects accurately and the EyeSight system
may not operate properly.
Handling of Radar Sensors (if equipped)
For details, refer to the vehicle Owner's Manual.
About EyeSight
S01098
15