Configuring Cordless Phone Functions - Mitel 650 DECT Manual

Personalizing your phone

Configuring cordless phone functions

This section explains the procedure for making settings on your cordless phone.
Switching the cordless phone on/off
You want to switch your phone on or off.
Locking/unlocking the keypad
You leave your workstation and want to avoid accidentally pressing your phone keys.
You can lock the keypad against unintentional actuation. You can choose whether you
want the keypad to be unlocked automatically when you receive a call or whether you pre-
fer to unlock the keys manually in any case.
70
Switching the phone off:
Keep the End call key pressed down for approx. 2 seconds and answer
to the safety prompt.
Ok
➔
The phone is switched off.
Or:
Function is also available via the menu:
Switch off.
Notes:
• You cannot switch the phone off in a call.
• When the phone is switched off, incoming calls are stored in the call
list.
Switching the phone on:
Pick up the phone from the charging unit and keep the End call key
pressed down for approx. 2 seconds.
➔
The phone is switched on.
Note:
If you cordless phone cannot find a system, the display shows "No sys-
tem". You can switch to an available system using
>
System System registrations
systems", page 82).
Locking the keypad:
Keep the hash key pressed down for approx. 2 seconds.
➔
The keypad is locked.
>
Menu Settings
(see chapter l "Managing communication
eud-1722/1.0 – R3.0 – 08.2015
> >
General
> >
Menu Settings
Mitel 650 DECT Phone