Switch Between Calls - Mitel DT4X3 User Manual

Mitel DT4x3 Cordless Phones for MiVoice MX-ONE
3 Press
The system calls the external number.
Cancel a single callback:
1 Press #37* (U.S. and Canada, Press #6*):
2 Dial extension number and Press #
Note: To cancel a single callback on a specific external line, dial the digit or digits to get
the line instead of the extension number
3 Press
Wait for the call timer to start in the display.
4 Press
Cancel all callbacks:
1 Press #37# (U.S. and Canada, Press #6#)
2 Press
Wait for the call timer to start in the display
3 Press

6.3.8 SWITCH BETWEEN CALLS

Prerequisite, a new call has been started during conversation, see
Call during Conversation
1 Press "More" during the call.
2 Select "Switch".
3 Press "Select" to switch to the other call. The first call is on hold.
If needed, repeat the steps above to switch between the calls.
6.3.9 END A CALL
Prerequisite, a new call has been started during conversation, see
Call during Conversation
1 Press "More" during the call.
2 Select "End Call".
3 Press "Select". This will end the current call and the previous call is resumed.
6.3.10 TRANSFER A CALL
Prerequisite, a new call has been started during conversation, see
Call during Conversation
When a caller has two ongoing calls, he/she can transfer the first call to the second
call.
1 Press "More" during the call.
2 Select "Transfer".
3 Press "Select" to transfer the current call to the other call.
1424-EN/LZT103 089 D1 2016-03-04
.to finish the procedure
to finish the procedure.
on page 33.
on page 33.
on page 33.
6.3.5 Start a New
6.3.5 Start a New
6.3.5 Start a New
34