Table of Contents
Advertisement
3
C12
Unscrew the Locknuts (D9) from both ends of the Axle (C10) and remove the Axle Washers
(D8). Slide the axle through the corresponding holes in the left legs. Place a axle washer on
each end of the axle. Slide the Wheels (C11) over each end of the axle. Secure the wheels
into place with the locknuts. Place the Wheel Hubcaps (C12) onto the outsides of the wheels.
4
Attach the Left Side Shelf (C1) and Right Side Shelf (C2) onto left and right legs using the
M6x25 Bolts (D6x16pcs) .
C10
D9
C11
D8
C1
6
C2
Advertisement
Table of Contents
Need help?
Do you have a question about the Spectrum THG2302PA and is the answer not in the manual?
Questions and answers