Exemption From Liability - Flex Giraffe GE 5 R Operating Instructions Manual

GE 5/GE 5 R/GSE 5/GSE 5 R
Declaration of Conformity
We as the manufacturer: FLEX Elektrowerkzeuge
GmbH, Business address: Bahnhofstr. 15,
71711 Steinheim, Germany
declare under our sole responsibility, that the product(s)
described under „Technical specifications" fulfills all the
relevant provisions of The Supply of Machinery
(Safety) Regulations S.I. 2008/1597 and also fulfills all
the relevant provisions of the following UK Regulations:
Electromagnetic Compatibility Regulations S.I.
2016/1091, The Restriction of the Use of Certain
Hazardous Substances in Electrical and Electronic
Equipment Regulations S.I. 2012/3032 and are
manufactured in accordance with the following
designated Standards: BS EN 60745-1:2010,
BS EN 60745-2-3:2011, BS EN 55014-1:2017,
BS EN 55014-2:2015, BS EN 61000-3-2:2014,
BS EN 61000-3-3:2013
Place of declaration: Steinheim, Germany.
Responsible person: Peter Lameli, Technical
Director – FLEX-Elektrowerkzeuge GmbH
Contact details for Great Britain:
FLEX Power Tools Limited,
Unit 8 Anglo Office Park, Lincoln Road,
HP 12, 3RH Buckinghamshire,
United Kingdom.
19.05.2021

Exemption from liability

The manufacturer and his representative are not liable for any
damage and lost profit due to interruption in business caused
by the product or by an unusable product.
The manufacturer and his representative are not liable for any
damage which was caused by improper use of the product or
by use of the product with products from other manufacturers.
16