Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Lionel Manuals
  4. Toy
  5. Rover’s Revenge
  6. Owner's manual

Lionel Rover’s Revenge Owner's Manual

Hide thumbs
1
2
3
4
5
6
7
8

Advertisement

Quick Links

Download this manual
72-4170-250
2/04
Lionel
Rover's Revenge
Owner's Manual

Advertisement

loading

Related Manuals for Lionel Rover’s Revenge

Summary of Contents for Lionel Rover’s Revenge

  • Page 1 72-4170-250 2/04 Lionel Rover’s Revenge Owner’s Manual...
  • Page 2 Powering the accessory Controlling the accessory Controlling the accessory in the Command Control environment Limited Warranty/Lionel Service The following Lionel marks may be used throughout this instruction manual and are protected under law. All rights reserved. Lionel ® , TrainMaster ®...

  • Page 3: Powering The Accessory

    Powering the accessory his accessory operates best at 12-18 volts (AC). You may choose to supply power with a separate accessory power supply or through a Lionel Lockon (available separately, 6-62900), or a FasTrack Power Wire (available separately, 6-12053). As illustrated in Figure 1, attach a wire to each of the spring clip terminals on the accessory and connect them to the accessory terminals on the power supply or to the spring clip terminals on the Lockon.

  • Page 4: Controlling The Accessory

    Controlling the accessory lide the mailbox to turn the accessory on and off. Refer to Figure 2. Figure 2. ON/OFF switch location...

  • Page 5: Controlling The Accessory In The Command Control Environment

    Controlling the accessory in the Command Control environment ou may choose to wire this accessory with an SC-2 Switch and Accessory Controller (available separately, 6-22980) or the Accessory Switch Controller (available separately, 6-14182). We recommend using 22-gauge wire. Refer to these manuals for additional information.
  • Page 6 Controlling the accessory in the Command Control environment (continued) SC-2 wiring and operation hree wires (not included) are needed to connect the accessory to the SC-2 and a separate accessory transformer. Refer to Figure 3. 1. Attach one wire to the transformer Common/Ground/U terminal and connect it to the accessory COMM (common) position on the SC-2.

  • Page 7: Controlling The Accessory In The Command Control Environment

    Controlling the accessory in the Command Control environment (continued) Accessory Switch Controller wiring and operation hree wires (not included) are needed to connect the accessory to the Accessory Switch Controller (ASC) and a separate accessory transformer. Refer to Figure 4. 1.

  • Page 8: Limited Warranty/Lionel Service

    Lionel L.L.C. or an authorized Lionel L.L.C. Service Center, together with proof of original purchase will, at the option of Lionel L.L.C., be repaired or replaced, without charge for parts or labor. In the event the defective product cannot be repaired, and a replacement is not available, a refund of the original purchase price will be granted.