Installing A Cooling Fan - Dell PowerEdge XE8640 Installation And Service Manual

3. Remove the air shroud.
Steps
Hold the orange release tab and lift the cooling fan to disconnect the fan from the connector on the system board.
Figure 38. Removing a cooling fan
Next steps
1. Replace a cooling fan.

Installing a cooling fan

Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in the
3. Remove the air shroud.
Steps
Align and lower the cooling fan into the cooling fan assembly until the fan clicks into place.
78 Installing and removing system components
Safety instructions.
Before working inside your system.