Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for ShowPro Atomizer Pro Hazer
Summary of Contents for ShowPro Atomizer Pro Hazer
- Page 1 Atomizer Pro Hazer USER MANUAL...
- Page 2 ◆Respect the local environmental rules. ◆If there are any doubts, contact with your local waste disposal authorities. ◆Thank you for choosing the Atomizer Pro Hazer. if the device was damaged in transit, don’t install or use it and contact with your dealer.
- Page 3 5. Place the Atomizer Pro Hazer on the ground horizontally or install it on the hanger, but not aslant. The machine should keep a minimum 30-centimeter distance all around.
- Page 4 ●Safety Instruction ◆Be very careful during the installation: touching lives can cause life-threatening electroshocks. ◆Keep this device away from rain and moisture. Do not touch the device during operations the housing heats up. ◆Unplug the mains lead before opening the housing. ◆Damage caused by disregarding of certain guidelines in this manual is not covered by the warranty and the de3aler will not bear responsibility for any ensuing defects or ◆A qualified technician should install and service this device.
- Page 5 ●General Guidelines ◆This device is designed for professional use on the stage, in disco, theaters, etc. the ◆Do not shake the device. Avoid brute force when installing or operating the device. device should only be used indoors with an alternating current of max. 230V AC/50 HZ/ ◆Select a location where the device is protected against extreme heat, dust and moisture.
- Page 6 Connect the provided XLR cable to the female 3-pin XLR output of your controller and the other side to the male 2-pin input of the Atomizer Pro Hazer. Multiple Atomizer Pro’s can be linked through serial linking. The linking cable should be two core, screened cable with XLR input and output connectors, please refer to the diagram at the right.
Need help?
Do you have a question about the Atomizer Pro Hazer and is the answer not in the manual?
Questions and answers