Related Manuals for ShowPro LED House Light
Summary of Contents for ShowPro LED House Light
- Page 1 LED House Light Warm White COB LED House Light www.showtech.com.au www.showtech.com.au...
- Page 2 LED House Light WARNING! Before carrying out any operations with the unit, carefully read this instruction manual and keep it with cure for future reference. It contains important information about the installation, usage and maintenance of the unit. SAFETY General instruction •...
-
Page 3: Table Of Contents
LED House Light TABLE OF CONTENTS Safety General instructions Warnings and installation precautions General information 1 Introduction 1. 1 Description and Technical speci cations 1.2 Maintenance Cleaning the unit Trouble shooting 1. 3 Operating elements and connections 2 Installation 2. 1 Dimensions 2.2 Mounting... - Page 4 Dimmer Mode Press the MENU button until Dimmer Mode is displayed, then press ENTER. This LED House Light produces a consistent warm white output from a state-of-the-art COB LED • Press UP/DOWN buttons to select source suitable for live and broadcast applications.
-
Page 5: Maintenance
LED House Light LED House Light 3.13 PHOTOMETRICS (cont’d) - 1.2 - MAINTENANCE MAINTENANCE AND CLEANING THE UNIT • Make sure the area below the installation place is free from unwanted persons during setup. 30° lens installed • All screws used for installing the device and any of its parts should be tightly fastened and should not be corroded. -
Page 6: Operating Elements And Connections
LED House Light LED House Light 3.13 PHOTOMETRICS 1.3 OPERATING ELEMENTS AND CONNECTIONS Beam angle Field angle Lumens Lux @ 5 meters 15° lens 16° 28° 7183 1942 15° lens + Egg crate : 14° 26° 4505 1771 Mounting 15° lens + Top hat 15°... - Page 7 LED House Light LED House Light 3.12 DMX CONTROL 2.1 DIMENSIONS 2 CHANNEL MODE Function Value Percent/Setting Dimmer 000-255 0~100% LENGTH with lens attached 000-010 Preset LED Frequency from display menu 011-050 600Hz 051-100 1200Hz LED Frequency 101-150 2000Hz 151-200...
-
Page 8: Installation
LED House Light LED House Light - 2 - INSTALLATION 3.10 CONNECTION OF THE DMX LINE DMX connection employs standard XLR connectors. Use shielded pair-twisted cables with 120 imped- ance and low capacity. 2.2 MOUNTING The following diagram shows the connection mode:... -
Page 9: Functions And Settings
LED House Light LED House Light - 3 - FUNCTIONS AND SETTINGS 3.1 OPERATION 3.8 DMX CONFIGURATION Wire the power cable to power (100~240V/50~60Hz) according to the below table: This xture o ers three di erent DMX modes: • Press the MENU button until [DMX CHANNEL] is displayed, then press the ENTER button to con rm. -
Page 10: Menu Structure
LED House Light LED House Light 3.3 MENU STRUCTURE 3.4 AUTO SHOW If DMX control is not being used, the unit can run its onboard auto show programs: • Press the MENU button until the display shows Auto Show, then press the ENTER button.
Need help?
Do you have a question about the LED House Light and is the answer not in the manual?
Questions and answers