Storage; Engine Storage; Pressure Washer Storage - Champion Power Equipment C24065 Owner's Manual

Storage

For long term storage, please follow these
guidelines.

Engine Storage

1. Allow the engine to cool completely
before storage.
2. Clean the engine according to the
instructions in the Maintenance section.
3. Drain all fuel completely from the fuel
line and carburetor to prevent gum from
forming.
4. Add a fuel stabilizer into the fuel tank.
5. Change the oil.
6. Remove the spark plug and pour about
½ ounce of oil into the cylinder. Crank
the engine slowly to distribute the oil
and lubricate the cylinder.
7. Reattach the spark plug.

Pressure Washer Storage

1. Allow the pressure washer to cool
completely before storage.
2. Turn off the fuel supply at the fuel valve.
3. Clean the pressure washer according to
the instructions in the Maintenance
section.
4. Store the unit in a clean, dry area out of
direct sunlight.
Rev C24065-20080409
Winter Storage
Protect your pressure washer parts from
freezing.
1. Apply all storage instructions from
previous sections.
2. Make sure pressure washer hose is free
of all water before storing for winter
3. In order to prevent the pump from
freezing you will need to insert RV
antifreeze.
4. You will need approximately 6 ounces of
RV Antifreeze, a funnel, and
approximately 12" of garden house or
equivalent. See diagram below.
5. Pour the antifreeze into the funnel, then
pull on the engine recoil starter to create
suction in the pump housing. Pull the
recoil several times until antifreeze
comes out of the pump outlet.
Storage
15