Champion Power Equipment 100786 Operator's Manual
  1. Manuals
  2. Brands
  3. Champion Power Equipment Manuals
  4. Pressure Washer
  5. 100786
  6. Operator's manual
Champion Power Equipment 100786 Operator's Manual

Champion Power Equipment 100786 Operator's Manual

3500 psi pressure washer
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
OPERATOR'S MANUAL
MODEL #100786
3500 PSI PRESSURE WAShER
REGISTER YOUR PRODUCT ONLINE
at championpowerequipment.com
or visit championpowerequipment.com
SAVE ThESE INSTRUCTIONS. This manual contains important safety precautions which should be read and understood before operating the product. Failure to do
so could result in serious injury. This manual should remain with the product.
Specifications, descriptions and illustrations in this manual are as accurate as known at the time of publication, but are subject to change without notice.
Made in China - REV 20200117
Champion Power Equipment, Inc., Santa Fe Springs, CA USA

Advertisement

Table of Contents
loading

Related Manuals for Champion Power Equipment 100786

Summary of Contents for Champion Power Equipment 100786

  • Page 1 This manual should remain with the product. Specifications, descriptions and illustrations in this manual are as accurate as known at the time of publication, but are subject to change without notice. Made in China - REV 20200117 Champion Power Equipment, Inc., Santa Fe Springs, CA USA...

  • Page 2: Table Of Contents

    TAbLE Of CONTENTS 100786 - 3500 PSI PRESSURE WAShER TAbLE Of CONTENTS Maintenance ..........Cleaning the Pressure Washer ........

  • Page 3: Introduction

    100786 - 3500 PSI PRESSURE WAShER SAfETY DEfINITIONS INTRODUCTION Congratulations on your purchase of a Champion Power Equipment The purpose of safety symbols is to attract your attention to (CPE) product. CPE designs, builds, and supports all of our possible dangers. The safety symbols, and their explanations, products to strict specifications and guidelines.

  • Page 4: Important Safety Instructions

    IMPORTANT SAfETY INSTRUCTIONS 100786 - 3500 PSI PRESSURE WAShER IMPORTANT SAfETY INSTRUCTIONS WARNING  Spark from removed spark plug wire can result in fire or WARNING  electrical shock. Cancer and Reproductive Harm – www.P65Warnings.ca.gov When servicing the pressure washer:...
  • Page 5 IMPORTANT SAfETY INSTRUCTIONS 100786 - 3500 PSI PRESSURE WAShER WARNING NOTICE   NEVER spray flammable liquids or use pressure washer in Improper treatment or use of the pressure washer can damage areas containing combustible dust, liquids, or vapor. it, shorten its life and void your warranty.

  • Page 6: Fuel Safety

    IMPORTANT SAfETY INSTRUCTIONS 100786 - 3500 PSI PRESSURE WAShER When adding or removing gasoline: WARNING  – DO NOT light or smoke cigarettes. High pressure spray can splash back at operator or propel – Always turn the pressure washer off and let cool for a objects.

  • Page 7: Safety And Dataplate Labels

    WHITE substrate. WARNING This artwork belongs to Champion Power Equipment. The contents are confidential and privileged and shall not be disclosed to or used by or for DO NOT TOUCH! outside parties without the explicit consent of Champion Power Equipment.

  • Page 8: Safety Symbols

    IMPORTANT SAfETY INSTRUCTIONS 100786 - 3500 PSI PRESSURE WAShER Safety Symbols Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to more safely operate the product.

  • Page 9: Operation Symbols

    WHITE substrate. 11. Pull the recoil cord. This artwork belongs to Champion Power Equipment. The contents are confidential and privileged and shall not be disclosed to or used by or for outside parties without the explicit consent of Champion Power Equipment.

  • Page 10: Controls And Features

    CONTROLS AND fEATURES 100786 - 3500 PSI PRESSURE WAShER CONTROLS AND fEATURES Read this operator’s manual before operating your pressure washer. Familiarize yourself with the location and function of the controls and features. Save this manual for future reference. Pressure Washer 1.

  • Page 11: Parts Included

    CONTROLS AND fEATURES 100786 - 3500 PSI PRESSURE WAShER Parts Included Part Part Qty. Hardware Hardware Qty Tools Needed Wheel cap Wheels Pin roll R-Pin Ø2 x 33 Flange bolt M8 x 45 2x 12mm wrench or Support Leg socket...

  • Page 12: Assembly

    ASSEMbLY 100786 - 3500 PSI PRESSURE WAShER ASSEMbLY Support Legs 1. Attach the supports legs to the pressure washer frame with Your pressure washer requires some assembly. This unit ships 2 M8 x 45 flange bolts and 2 M8 flange lock nuts per leg.

  • Page 13: High Pressure Hose Strap

    ASSEMbLY 100786 - 3500 PSI PRESSURE WAShER Trigger Gun Holder Nozzles 1. Align the trigger gun holder to the frame. 1. Nozzles are stored in the top panel. To store the nozzle, press it into the corresponding opening. To remove the nozzle, just 2.

  • Page 14: Attach The Trigger Gun Assembly

    ASSEMbLY 100786 - 3500 PSI PRESSURE WAShER Attach the Trigger Gun Assembly 1. Attach the spray wand to the trigger gun. 2. Rotate (clockwise) the M22 coupler on the trigger gun until the spray wand is secure. Do not overtighten.

  • Page 15: Install The Vented Oil Cap

    ASSEMbLY 100786 - 3500 PSI PRESSURE WAShER Add Engine Oil NOTICE  CAUTION Do not run the pressure washer without water supply  connected and turned on, as this may damage the high DO NOT attempt to crank or start the engine before it has been pressure seals and decrease pump life.

  • Page 16: Add Fuel

    ASSEMbLY 100786 - 3500 PSI PRESSURE WAShER Add fuel Use clean, fresh, regular unleaded gasoline with a minimum octane rating of 85 and an ethanol content of 10% or less by volume. y b c OIL DIP STICK DO NOT mix oil with gasoline.

  • Page 17: Operation

    OPERATION 100786 - 3500 PSI PRESSURE WAShER OPERATION CAUTION  Use unleaded gasoline with a minimum octane rating of 85 Pressure Washer Location and an ethanol content of 10% or less by volume. This pressure washer must have at least 5 ft. (1.5 m) of clearance DO NOT light cigarettes or smoke when filling the tank.
  • Page 18 OPERATION 100786 - 3500 PSI PRESSURE WAShER 3. Move the choke lever to the “CHOKE” position. NOTICE  If the engine does not start after 2 pulls, relieve pump pressure by pulling the trigger on the trigger gun. NOTICE ...

  • Page 19: Distance From Cleaning Surface

    OPERATION 100786 - 3500 PSI PRESSURE WAShER Distance from Cleaning Surface The distance between the spray nozzle and the cleaning surface is another factor that affects the impact force of the water. The impact force of the water increases as the nozzle is moved closer to the surface. You can vary the impact force by controlling –...

  • Page 20: High Pressure Wash

    OPERATION 100786 - 3500 PSI PRESSURE WAShER high Pressure Wash NOTICE  CAUTION Use only detergents designed for pressure washers.  Do not use household detergents, acids, alkalines, bleaches, Always engage the trigger safety latch when the unit is not in solvents, flammable material, or industrial grade solutions, use.

  • Page 21: System Flush

    OPERATION 100786 - 3500 PSI PRESSURE WAShER 4. Connect the other end of the detergent suction hose to the To reduce the risk of bodily injury or property damage, always detergent barb on the pump. follow this procedure whenever spraying is stopped, when work is completed, and before checking or repairing any part of the system.

  • Page 22: Stopping The Engine

    OPERATION 100786 - 3500 PSI PRESSURE WAShER Stopping the Engine Operation at high Altitude 1. Turn the fuel valve to the “OFF” position. The density of air at high altitudes is lower than at sea level. Engine power is reduced as the air mass and air-fuel ratio decrease.

  • Page 23: Maintenance

    MAINTENANCE 100786 - 3500 PSI PRESSURE WAShER MAINTENANCE Cleaning Spray Nozzle Detach the quick connect nozzle from the wand. Use a small wire Make certain that the pressure washer is kept clean and stored rod (paper clip) to loosen up any particles in the quick connect properly.

  • Page 24: Cleaning And Adjusting The Spark Plug(S)

    MAINTENANCE 100786 - 3500 PSI PRESSURE WAShER Cleaning the Air filter NOTICE  1. Using your finger, pry the outer tab up slightly and lift the air Once oil has been added, a visual check should show oil filter cover above the tab lock position.

  • Page 25: Adjusting The Governor

    2. Clean engine according to the Maintenance section. adverse conditions. Contact our help line at 1-877-338-0999 to 3. To extend the fuel storage life add a properly formulated fuel locate the nearest Champion Power Equipment certified service stabilizer to the tank. dealer for your maintenance needs.

  • Page 26: Winter Storage

    STORAGE 100786 - 3500 PSI PRESSURE WAShER 6. Use a funnel (and appropriate hose if necessary) under the DANGER  carburetor drain bolt to avoid spillage. Be sure to properly dispose of the drained gasoline according to local regulations Engine exhaust contains odorless and colorless carbon or guidelines.

  • Page 27: Specifications

    SPECIfICATIONS 100786 - 3500 PSI PRESSURE WAShER SPECIfICATIONS NOTICE  Temperature will affect engine oil and engine performance. Pressure Washer Specifications Change the type of engine oil used based on the temperature Model ............

  • Page 28: Parts Diagram

    SPECIfICATIONS 100786 - 3500 PSI PRESSURE WAShER Parts Diagram...

  • Page 29: Parts List

    SPECIfICATIONS 100786 - 3500 PSI PRESSURE WAShER Parts List Part Number Description Qty. Part Number Description Qty. 27.302 Engine, 224cc O Ring, Ø17.1 × Ø11.8 × 27 2.07.033 Ø2.65 2.14.001 Key, SQ 4.78 × 4.78 × 40 28 255.200701.05.2 Right Handle, Black 2.08.173...

  • Page 30: Engine Parts Diagram

    SPECIfICATIONS 100786 - 3500 PSI PRESSURE WAShER Engine Parts Diagram...

  • Page 31: Engine Parts List

    SPECIfICATIONS 100786 - 3500 PSI PRESSURE WAShER Engine Parts List Part Number Description Qty. Part Number Description Qty. 43 1.5789.0832 1.16674.0608 Flange Bolt M6 × 8 Flange Bolt M8 × 32 44 21.031000.01.48 Oil Filler Cap, Yellow 27.061100.02.48 Cover, Recoil Starter, Yellow 45 23.110005.01...
  • Page 32 SPECIfICATIONS 100786 - 3500 PSI PRESSURE WAShER Part Number Description Qty. 85 21.080002.00 Suppoet, Diode 86 21.040010.00 Bolt, Rocker Arm 87 23.040004.00 Guide Plate, Push Rod 88 27.040005.00 Push Rod 89 21.020002.00 Gasket, Cylinder Head Cover 90 15.021000.00 Cover, Cylinder Head 91 21.020001.00...

  • Page 33: Troubleshooting

    TROUbLEShOOTING 100786 - 3500 PSI PRESSURE WAShER TROUbLEShOOTING Problem Cause Solution No fuel. Add fuel. Pressure washer will not start. Faulty spark plug. Replace spark plug. Fill crankcase to the proper level. Place Pressure washer will not start; Low oil level.
  • Page 34 Consequential Damage electrical components will be free of defects in material and Champion Power Equipment disclaims any obligation to cover workmanship for a period of two years (parts and labor) from any loss of time, use of this product, freight, or any incidental the original date of purchase and 90 days (parts and labor) for or consequential claim by anyone from using this product.
  • Page 35 AND THE UNITED STATES ENVIRONMENT PROTECTION AGENCY (U.S. EPA) EMISSION CONTROL SYSTEM WARRANTY Your Champion Power Equipment (CPE) engine complies with U.S. EPA emission regulations. YOUR WARRANTY RIGHTS AND OBLIGATIONS: The US EPA AND CPE are pleased to explain the Federal Emission Control Systems Warranty on your 2020 small off-road engine (SORE) and engine powered equipment.
  • Page 36 EMISSION CONTROL SYSTEM WARRANTY The following are specific provisions relative to your Emission Control System (ECS) Warranty Coverage. 1. APPLICABILITY: This warranty shall apply to 1997 and later model year small off-road engines (SORE). The ECS Warranty Period shall begin on the date the new engine or equipment is delivered to its original, end-use purchaser, and shall continue for 24 consecutive months thereafter.
  • Page 37 You must take your CPE engine or the product on which it is installed, along with your warranty registration card or other proof of original purchase date, at your expense, to any Champion Power Equipment dealer who is authorized by Champion Power Equipment, Inc. to sell and service that CPE product during his normal business hours.

This manual is also suitable for:

100782

Table of Contents