SAVE ThESE INSTRUCTIONS. This manual contains important safety precautions which should be read and understood before operating the product. Failure to do
so could result in serious injury. This manual should remain with the product.
Specifications, descriptions and illustrations in this manual are as accurate as known at the time of publication, but are subject to change without notice.
Made in China - REV 20200302
Champion Power Equipment, Inc., Santa Fe Springs, CA USA
Summary of Contents for Champion Power Equipment 100790
Page 1
This manual should remain with the product. Specifications, descriptions and illustrations in this manual are as accurate as known at the time of publication, but are subject to change without notice. Made in China - REV 20200302 Champion Power Equipment, Inc., Santa Fe Springs, CA USA...
100790 - 4200 PSI PRESSURE WAShER SAfETY DEfINITIONS INTRODUCTION Congratulations on your purchase of a Champion Power Equipment The purpose of safety symbols is to attract your attention to (CPE) product. CPE designs, builds, and supports all of our possible dangers. The safety symbols, and their explanations, products to strict specifications and guidelines.
IMPORTANT SAfETY INSTRUCTIONS 100790 - 4200 PSI PRESSURE WAShER IMPORTANT SAfETY INSTRUCTIONS WARNING Spark from removed spark plug wire can result in fire or DANGER electrical shock. Pressure washer exhaust contains carbon monoxide, a When servicing the pressure washer: colorless, odorless, poisonous gas.
Page 5
IMPORTANT SAfETY INSTRUCTIONS 100790 - 4200 PSI PRESSURE WAShER WARNING NOTICE NEVER spray flammable liquids or use pressure washer in Improper treatment or use of the pressure washer can damage areas containing combustible dust, liquids, or vapor. it, shorten its life and void your warranty.
IMPORTANT SAfETY INSTRUCTIONS 100790 - 4200 PSI PRESSURE WAShER When adding or removing gasoline: WARNING – DO NOT light or smoke cigarettes. High pressure spray can splash back at operator or propel – Always turn the pressure washer off and let cool for a objects.
WHITE substrate. WARNING This artwork belongs to Champion Power Equipment. The contents are confidential and privileged and shall not be disclosed to or used by or for DO NOT TOUCH! outside parties without the explicit consent of Champion Power Equipment.
IMPORTANT SAfETY INSTRUCTIONS 100790 - 4200 PSI PRESSURE WAShER Safety Symbols Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to more safely operate the product.
WHITE substrate. 11. Pull the recoil cord. This artwork belongs to Champion Power Equipment. The contents are confidential and privileged and shall not be disclosed to or used by or for outside parties without the explicit consent of Champion Power Equipment.
CONTROLS AND fEATURES 100790 - 4200 PSI PRESSURE WAShER CONTROLS AND fEATURES Read this operator’s manual before operating your pressure washer. Familiarize yourself with the location and function of the controls and features. Save this manual for future reference. Pressure Washer 1.
CONTROLS AND fEATURES 100790 - 4200 PSI PRESSURE WAShER Parts Included Part Part Qty. Hardware Hardware Qty Tools Needed Wheel cap Wheels Pin roll R-Pin Ø2 x 33 Flange bolt M8 x 45 2x 12mm wrench or Support Leg socket...
ASSEMbLY 100790 - 4200 PSI PRESSURE WAShER ASSEMbLY Support Legs 1. Attach the supports legs to the pressure washer frame with Your pressure washer requires some assembly. This unit ships 2 M8 x 45 flange bolts and 2 M8 flange lock nuts per leg.
ASSEMbLY 100790 - 4200 PSI PRESSURE WAShER Trigger Gun Holder Nozzles 1. Align the trigger gun holder to the frame. 1. Nozzles are stored in the top panel. To store the nozzle, press it into the corresponding opening. To remove the nozzle, just 2.
ASSEMbLY 100790 - 4200 PSI PRESSURE WAShER Attach the Trigger Gun Assembly 1. Attach the spray wand to the trigger gun. 2. Rotate (clockwise) the M22 coupler on the trigger gun until the spray wand is secure. Do not overtighten.
ASSEMbLY 100790 - 4200 PSI PRESSURE WAShER Add Engine Oil NOTICE CAUTION Do not run the pressure washer without water supply connected and turned on, as this may damage the high DO NOT attempt to crank or start the engine before it has been pressure seals and decrease pump life.
ASSEMbLY 100790 - 4200 PSI PRESSURE WAShER Add fuel Use clean, fresh, regular unleaded gasoline with a minimum octane rating of 85 and an ethanol content of 10% or less by volume. y b c OIL DIP STICK DO NOT mix oil with gasoline.
OPERATION 100790 - 4200 PSI PRESSURE WAShER OPERATION CAUTION Use unleaded gasoline with a minimum octane rating of 85 Pressure Washer Location and an ethanol content of 10% or less by volume. This pressure washer must have at least 5 ft. (1.5 m) of clearance DO NOT light cigarettes or smoke when filling the tank.
Page 18
OPERATION 100790 - 4200 PSI PRESSURE WAShER 3. Move the choke lever to the “CHOKE” position. NOTICE If the engine does not start after 2 pulls, relieve pump pressure by pulling the trigger on the trigger gun. NOTICE ...
OPERATION 100790 - 4200 PSI PRESSURE WAShER Distance from Cleaning Surface The distance between the spray nozzle and the cleaning surface is another factor that affects the impact force of the water. The impact force of the water increases as the nozzle is moved closer to the surface. You can vary the impact force by controlling –...
OPERATION 100790 - 4200 PSI PRESSURE WAShER high Pressure Wash NOTICE CAUTION Use only detergents designed for pressure washers. Do not use household detergents, acids, alkalines, bleaches, Always engage the trigger safety latch when the unit is not in solvents, flammable material, or industrial grade solutions, use.
OPERATION 100790 - 4200 PSI PRESSURE WAShER 4. Connect the other end of the detergent suction hose to the To reduce the risk of bodily injury or property damage, always detergent barb on the pump. follow this procedure whenever spraying is stopped, when work is completed, and before checking or repairing any part of the system.
OPERATION 100790 - 4200 PSI PRESSURE WAShER Stopping the Engine Operation at high Altitude 1. Turn the fuel valve to the “OFF” position. The density of air at high altitudes is lower than at sea level. Engine power is reduced as the air mass and air-fuel ratio decrease.
MAINTENANCE 100790 - 4200 PSI PRESSURE WAShER MAINTENANCE Cleaning Spray Nozzle Detach the quick connect nozzle from the wand. Use a small wire Make certain that the pressure washer is kept clean and stored rod (paper clip) to loosen up any particles in the quick connect properly.
MAINTENANCE 100790 - 4200 PSI PRESSURE WAShER Cleaning the Air filter NOTICE 1. Using your finger, pry the outer tab up slightly and lift the air Once oil has been added, a visual check should show oil filter cover above the tab lock position.
2. Clean engine according to the Maintenance section. adverse conditions. Contact our help line at 1-877-338-0999 to 3. To extend the fuel storage life add a properly formulated fuel locate the nearest Champion Power Equipment certified service stabilizer to the tank. dealer for your maintenance needs.
STORAGE 100790 - 4200 PSI PRESSURE WAShER 6. Use a funnel (and appropriate hose if necessary) under the DANGER carburetor drain bolt to avoid spillage. Be sure to properly dispose of the drained gasoline according to local regulations Engine exhaust contains odorless and colorless carbon or guidelines.
SPECIfICATIONS 100790 - 4200 PSI PRESSURE WAShER SPECIfICATIONS NOTICE Temperature will affect engine oil and engine performance. Pressure Washer Specifications Change the type of engine oil used based on the temperature Model ............
SPECIfICATIONS 100790 - 4200 PSI PRESSURE WAShER Parts List Part Number Description Qty. Part Number Description Qty. 46.105 Engine, 389cc O Ring, Ø17.1 × Ø11.8 × 27 2.07.033 Ø2.65 2.14.002 Key, SQ 6.3 × 6.3 × 50 28 255.200701.05.2 Right Handle, Black 2.08.011...
TROUbLEShOOTING 100790 - 4200 PSI PRESSURE WAShER TROUbLEShOOTING Problem Cause Solution No fuel. Add fuel. Pressure washer will not start. Faulty spark plug. Replace spark plug. Fill crankcase to the proper level. Place Pressure washer will not start; Low oil level.
Page 34
Consequential Damage electrical components will be free of defects in material and Champion Power Equipment disclaims any obligation to cover workmanship for a period of two years (parts and labor) from any loss of time, use of this product, freight, or any incidental the original date of purchase and 90 days (parts and labor) for or consequential claim by anyone from using this product.
Page 35
AND THE UNITED STATES ENVIRONMENT PROTECTION AGENCY (U.S. EPA) EMISSION CONTROL SYSTEM WARRANTY Your Champion Power Equipment (CPE) engine complies with U.S. EPA emission regulations. YOUR WARRANTY RIGHTS AND OBLIGATIONS: The US EPA AND CPE are pleased to explain the Federal Emission Control Systems Warranty on your 2020 small off-road engine (SORE) and engine powered equipment.
Page 36
EMISSION CONTROL SYSTEM WARRANTY The following are specific provisions relative to your Emission Control System (ECS) Warranty Coverage. 1. APPLICABILITY: This warranty shall apply to 1997 and later model year small off-road engines (SORE). The ECS Warranty Period shall begin on the date the new engine or equipment is delivered to its original, end-use purchaser, and shall continue for 24 consecutive months thereafter.
Page 37
You must take your CPE engine or the product on which it is installed, along with your warranty registration card or other proof of original purchase date, at your expense, to any Champion Power Equipment dealer who is authorized by Champion Power Equipment, Inc. to sell and service that CPE product during his normal business hours.