Stopping Procedure; Full Load Running - Barrus Shire 39 Manual

out this check.

3. Stopping Procedure

• Move speed control lever to idle position.
• Turn key to off position.

4. Full Load Running

• Running diesel engines near there rated output (maximum load) regularly will disperse
accumulated carbon and condensation, enhancing engine life and reducing
emissions.
• Running the engine at, or near maximum speed whilst in gear may not be possible on
inland waterways with speed limits in place. If this is possible, ensure that the water is
deep enough not to damage the propeller. It is recommended that the engine is run at
or near full load for 15 minutes (maximum revs, in gear) every 50 hours.
5. Refuelling
DIESEL FUEL IS FLAMMABLE AND EXPLOSIVE UNDER CERTAIN CONDITIONS.
DIESEL FUEL IS HARMFUL TO SKIN. MAKE SURE THE RELEVANT PERSONAL
• All Shire canal boat engines run on diesel fuel.
• Please note that when the vessel is to be left for any period of time, the fuel tank should
be left full to eliminate the build-up of condensation and formation of water in the fuel
tank.
• Engine to be turned off while refuelling
• The fuel type for all Shire canal boat engines is diesel. DO NOT USE BIODIESEL.
RDG603A63 - Issue 10
PROTECTION EQUIPMENT IS WORN.
WARNING:
WARNING:
Page 44 of 104