Making Coffee - BRAYER BR1123 Instruction Manual

Table of Contents

Advertisement

Available languages

Available languages

  • ENGLISH, page 1
• Insert the filter (5) into the holder (4).
• Fill about one half of the coffee flask (1) with pure
water.
• Open the lid (6) and pour the water from the flask (1)
to the water tank (7).
• Close the lid (6), place the lid (3) on the flask (1) and
place the flask (1) on the plate (12).
• Switch the coffee maker on by pressing the power
switch (10), therewith the light indicator in the switch
(10) lights up.
• When the tank (7) is empty, switch the coffee maker
off by pressing the power switch (10) again, therewith
the light indicator light goes out.
• Let the unit cool down for 5 minutes and pour the
water out from the flask (1).
• If necessary, repeat the washing cycle of the coffee
maker 2-3 times.

MAKING COFFEE

• Ready coffee is made by single passing of hot water
through the layer of ground coffee in the filter (5).
The taste of the drink depends on the quality of raw
products, therefore we recommend using well-
roasted and fresh-ground coffee beans.
• Open the lid (6), measure the required ground
coffee amount and pour it into the filter (5). 6 grams
of ground coffee per one coffee cup is required on
average; adjust the amount according to your taste.
• Fill the tank (7) with cold water up to the required
level. Determine the water level using the scale (8).
• Close the lid (6).
• Place the flask (1) with the lid (3) on the plate (12).
• Insert the power plug into the mains socket.
• Switch the coffee maker on by pressing the power
switch (10), therewith the light indicator in the switch
(10) lights up.
• After the flask (1) is filled with the coffee prepared,
switch the coffee maker off by pressing the power
switch (10) again, therewith the light indicator light
goes out.
• To keep the coffee hot, leave the flask (1) on the tray
(12) and do not switch the coffee maker off.
Notes: the keep warm time for ready coffee is limited to
40 minutes, after that the coffee maker will switch off.
ATTENTION!
• When you no longer need to heat the flask (1), switch
the coffee maker off by setting the power switch (10).
• Water passes through ground coffee under steam
pressure, so do not bend over the coffee maker, do
not open the lid (6), do not remove the filter holder (4)
and the filter (5) during making coffee.
• Do not leave the empty coffee flask (1) on the flask
warming tray (12), otherwise the glass may crack.
DESCALING
• Clean the coffee maker from scale regularly.
EN
7

Advertisement

Table of Contents
loading

Table of Contents