Making Coffee - BRAYER BR1125 Instruction Manual

8 EN
• After the water comes out, you will hear a sound
signal, the button (16) indicator will turn green.
• Switch the coffee maker off by pressing the on/off
button (16) « » again, unplug the power cord from
the electrical outlet.
• Let the coffee maker cool down and drain the water
from the flask (2).
• If necessary, repeat the washing cycle of the coffee
maker 2-3 times.
SETTING CURRENT TIME
- Plug the power cord into an electrical outlet, you
will hear a sound signal, the on/off button (16)
indicator « » will light up, the coffee maker will
switch to the standby mode.
- To enter the settings mode, press the on/off button
(16) « » once again.
- You can activate the automatic switch-off function
of the coffee maker after 10 minutes by pressing
and holding the on/off button (16) « ».
- To further set the delayed start function, you must
set the current time.
1. In the standby mode, the display (12) will show the
symbols «00:00».
2. To set the current time in hours, press the button (11)
«Hours», the display (12) will show digits from 0 to 23
hours.
3. To set the current time in minutes, press the button
(13) «Minutes», the display (12) will show digits from 00
to 59 minutes.
4. You can press and hold the buttons (11) and (13), to
quickly cycle through the hours and minutes settings,
release the button (11) and (13) at the moment of
correct current time.
Note: the accuracy movement for 24 hours is ± 15
seconds.

MAKING COFFEE

• Ready coffee is made by single passing of hot water
through the layer of ground coffee in the filter (8).
The taste of the drink depends on the quality of raw
products, therefore we recommend using well-
roasted and fresh-ground coffee beans.
• Remove the Cover (7).
• Measure the required amount of ground coffee and
pour it into the filter (8), use the measuring spoon
(23).
• Fill the tank (6) with cold water up to the required
level. Determine the water level using the scale (5).
• Close the lid (7).
• Put the flask (2) on the tray (3).
• Plug the power cord into an electrical outlet, you will
hear a sound signal, the on/off button (16) indicator
« » will light up, the coffee maker will switch to the
standby mode.