Chapter
3
Overview
P-Series Default Values and States
The factory settings for the P-Series emulation menu options are shown in
Table 13. Table 14 lists additional factory settings for parameters provided by
the LinePrinter+ formatting menus. (The EMULATION menu options are
described in the User's Manual ). Host control codes can override many of the
settings for these menu options.
Control Code 06
Control Code 08
Define CR Code
Auto LF
Overstrike
Define LF Code
Select SFCC
EVFU Selected
Alternate Set 80-9F
Character Set
Primary Subset
Extended Subset
SFCC d Command
72
Table 13. P-Series Default Settings
Characteristic
Default Setting
8.0 LPI
Elongated
CR = CR
Disable
Enable
LF = CR + LF
1
Enable
Control Code
IBM PC
ASCII (USA)
Code Page 437
Even Dot Plot