Underline; Vfu Commands; Vertical Tab - Printronix P5000LJ Series Programmer's Reference Manual

Chapter 3
Configuring the P-Series Emulation with Control Codes

Underline

ASCII Code SFCC - n
Hex Code
Dec Code
Purpose
where
Discussion When automatic underline is enabled, all characters, including
Example

VFU Commands

ASCII Code Refer to the P-Series VFU section in Chapter 7.
Purpose
Discussion Refer to Chapter 7 for detailed information.

Vertical Tab

ASCII Code VT
Hex Code
Dec Code
Purpose
Discussion If a vertical tab format is defined in the EVFU (channel 12) and
104
SFCC 2D n
SFCC 45 n
Enables or disables automatic underlining of all characters.
n = SOH (hex 01) or 1 (hex 31) enables automatic underlining.
n = NUL (hex 00) or 0 (hex 30) disables automatic underlining.
spaces, will be underlined until disabled.
The following sample illustrates automatic underlining.
Load and execute the VFU.
0B
11
Prints the data in the buffer and advances the paper to the next
vertical tab position.
the VFU is enabled, the paper is moved to the next vertical tab
position.
If a vertical tab format is not defined, the paper is advanced to
the next line at the current line spacing. More information on
Vertical Tabs is provided in the EVFU section of Chapter 7.