Character Font Selection - Printronix P5000LJ Series Programmer's Reference Manual

Name
Katakana-8
DEC 256 Greek
ELOT 928 Greek
Greek 3
ABY Greek
ABG Greek
ELOT 927 Greek
Greek 437
Greek 8859-7
1
5 - 20 cpi
2
n/a = not applicable. There is no designated code for this font; you can
select it only from the control panel.

Character Font Selection

The printer can print several different character sets (fonts). By performing a
printer self-test, you can see which fonts are installed in your printer. You may
specify any of these fonts from an application. On the self-test printout, each
available character font is printed along with a parameter number to the left of
the printed font.
Note Many earlier models of HP printers could not select certain combinations of
character sets. Your new P5000LJ printer does not have this limitation.
The new P5000LJ printer produces different characters than the previous
models, and your application may be requesting the old character set. You
will need to modify your application's settings to prevent it from selecting
the old character set.
Table 8. Available Symbol Sets (continued)
Code
8K 10 cpi in DP and NLQ only
2
n/a 5 - 20 cpi
2
n/a 5 - 20 cpi
2
n/a 5 - 20 cpi
2
n/a 5 - 20 cpi
2
n/a 5 - 20 cpi
2
n/a 5 - 20 cpi
2
n/a 5 - 20 cpi
2
n/a 5 - 20 cpi
NOTES
= 5, 10, 12, 13.3, 15, 16.67, 20 cpi
Character Font Selection
CPI in High Speed (HS),
Data Processing (DP) and
Near Letter Quality (NLQ)
1
in HS, DP and NLQ
1
in HS, DP and NLQ
1
in HS, DP and NLQ
1
in HS, DP and NLQ
1
in HS, DP and NLQ
1
in HS, DP and NLQ
1
in HS, DP and NLQ
1
in HS, DP and NLQ
45