P-Series Default Values And States - Printronix SL5000 Series Programmer's Reference Manual

Chapter 2
Introduction

P-Series Default Values and States

The factory settings for the P-Series emulation menu options are shown in
Table 1. Table 1 also lists additional factory settings for parameters provided
by the ASCII Emulation formatting menus. (The EMULATION menu options
are described in the User's Manual ). Host control codes can override many of
the settings for these menu options.
Select CPI
Select LPI
Typeface
Character Group
Character Set
Primary Subset
Extended Subset
Horizontal DPI
Vertical DPI
Prop. Spacing
Italic Print
Slashed Zero
Left Margin
Right Margin
Top Margin
Bottom Margin
Print Char. Set
Define CR code
Auto LF
Define LF code
*Advanced User:
Control Code 06
Control Code 08
Bold
22
Table 1. P-Series Default Settings
Characteristic Default Setting
10.0 CPI
6.0 LPI
Letter Gothic
Standard Sets
IBM PC
ASCII (USA)
Code Page 437
120 DPI
72 DPI
Enable
Disable
Disable
0 characters
0 characters
0 linespaces
0 linespaces
CR = CR
Disable
LF = CR + LF
8.0 LPI
Elongated
Disable