Table of Contents
Advertisement
Load Paper
4. Close the tractor covers.
5. Adjust the width of the tractors so the paper is moderately tight
between them.
6. Lock the tractors in place by pulling the locks toward you.
Figure 32 shows paper loaded in the printer.
Figure 32. Paper Loaded in the Printer
7. If you are not using the optional auto-fed power paper stacker,
go to the next step.
If you are using the optional auto-fed power paper stacker, set
the paper fold switch to match the direction of the paper's first
fold as shown on the label next to the switch.
If the first fold makes a valley, press down on the lower half of
the switch.
38
Advertisement
Table of Contents
