Table of Contents
Advertisement
4. Rotate the green latch clockwise to release the latch bar that
holds the OPC module and the developer unit in place. Open
the latch bar by swinging it to the left.
5. Grasp the OPC module's black handle and pull it forward. See
Figure 11.
CAUTION
Avoid exposing the surface of the OPC drum to ambient light
for more than five minutes. Exposing the OPC drum to light for
extended periods will degrade the photoconductors.
Figure 11. Pulling the OPC Module Forward
Components Inside the Printer
17
Advertisement
Table of Contents
