Install and Remove the Seal From the Toner Cartridge
6. Slowly push the new toner cartridge into the developer unit.
7. When the toner cartridge is all the way in the developer unit,
turn the cartridge counterclockwise slightly so that the pins on
the cartridge are engaged with the developer unit and hold the
cartridge in place. The toner cartridge sealing strip should be
facing up.
8. Unfasten the white tape holding the toner cartridge sealing strip
in place.
9. Remove the toner cartridge plastic sealing strip by pulling it
gently away from the printer. See Figure 28.
NOTE: Roll or fold the sealing strip as you pull. This prevents
Figure 28. Removing the Toner Cartridge Sealing Tape
34
snapping the sealing strip when it reaches the end of the
toner cartridge, which can scatter loose toner on the
sealing strip.