12. Take the opaque covering off the OPC module.
CAUTION
Do not expose the surface of the OPC drum to ambient light
for more than five minutes. Exposing the OPC drum to light for
an extended period will degrade the photoconductors.
CAUTION
Do not touch the OPC drum. Touching the OPC drum can
contaminate the surface and degrade the print quality.
13. Grasp the OPC module by its plastic handle, and put the
module back in the printer. See Figure 23.
Figure 23. Installing the OPC Module
14. Close the latch bar by swinging it up against the printer.
29