Update Status - Printronix L1524 Software Manual

Update Status

Update Status shows the condition of the printer at the time the status is
checked. To update the status of a printer, select Status Update Status, or
click the (green flag) button at the right of the toolbar.
Figure 30 shows a printer with a wireless NIC that uses two ports. The
(signal strength) icon represents the wireless port, while the
port) icon represents the ethernet port.
When the printer status updates, the
• Green indicates the printer is functioning properly and can print
Yellow indicates a warning, but the printer can print
•
• Red indicates the printer is not functioning properly and cannot print
• Grey indicates that the printer is not recognized
The message to the right of the printer description is identical to the message
on the operator panel.
If you enable status polling, the printer status updates automatically.
The (ribbon supply) icon indicates the amount of ribbon available on the
printer.
• Green indicates a full or nearly full ribbon supply
• Yellow indicates a moderate ribbon supply
• Red indicates a small or no ribbon supply
• Grey indicates that the ribbon supply feature is not supported on the
printer
NOTE: The following three icons appear only if the features are installed.
The (signal strength) icon indicates the strength of the radio signal.
Green with three or four bars indicates a strong signal
•
• Yellow with two bars indicates a moderate signal
• Red with one bar indicates a weak or non-existent signal
The (ethernet port) icon always remains blue, since it represents an
ethernet connection.
The (battery power) icon indicates the percentage of available battery
power.
Green indicates the battery has 61% to 100% available power
•
• Yellow indicates the battery has 20% to 60% available power
• Red indicates the battery has less than 20% available power
Figure 30. Update Status
(printer) icon may change color:
The Menu Bar
(ethernet
41