Snmp Browser - Printronix L1524 Software Manual

SNMP Browser

The SNMP Browser enables you to view attribute values in the Printer MIB
managed by the NIC. You can retrieve an attribute value of a specific MIB
Object ID (OID), or you can walk or traverse the MIB.
Three inputs are required before you can use the SNMP Browser:
1. IP: defines the IP address of the target printer.
2. OID: defines either the specific MIB object ID you want to view, or the
starting location for the MIB walk.
3. community: defines the access community defined in the NIC. The
default is public.
The Get button retrieves the attribute and attribute value for the specific OID
entered. If the OID entered is invalid, you will receive the Error: SNMP error
message.
The Walk button traverses the MIB starting with the OID entered. The display
is in the format: OID=Attribute_Value.
The Clear button clears the current display.
The File menu allows you to open a previously saved SNMP Browser
session, save the current session to file, or send the current session to a
printer.
Figure 43. SNMP Browser
The Menu Bar
53